Fire hoods for Large Light Fittings

Product Description

A cover made from fire resistant material which is fixed over fluorescent light fittings or air conditioning units. Fully ventilated to prevent units from overheating.

– Provides acoustic protection and up to 88 minutes integrity- Designed for use with fluorescent light fittings and air conditioning units which are recessed into fire rated suspended or plasterboard ceilings

– Easily installed by one person in minutes

– Can be fitted during the installation process, or retrofitted to existing air conditioning units and light fittings

APPLICATION INSTRUCTIONS

Lay the tent out flat on its back and thread the rods supplied through the centre hole.

With the tent laid out, turn it to its upright position and insert rod ends into the corresponding pockets located at each corner of the tent.

Place the tent over the light fitting and fit the cable through the ventilation hole, connecting to the light fitting according to the manufacturer’s instructions.

Pull the material away from the fitting over the T-bar at each corner and fix the material to the T-bar with the supplied clips. Pinch each clip with a pair of pliers to fix tightly.

For larger tents (FT4 and up), follow the above procedure, but be sure to fix in place where the tent lies over the T-bars with supplied clips.