This product cannot currently be bought online. Please contact us on or click on the enquire button below.
The FireSafe Plus is an electrically operated automatic Fire Barrier, to be used to form a continuous barrier against fire.
Designed to operate for 2000 cycles at normal ambient temperatures in the range of 0°C to 60°C and to withstand hot air and smoke at temperatures up to 1000°C for over 120 minutes once only.
The Firesafe Plus can be provided to protect openings widths from 9m to 6.6m in height.
The curtain head box is manufactured from 1.2mm zintec steel, the enclosure is rated at the same temperature as the curtain fabric. Removable cover plates are incorporated to allow access to the curtain rollers. Standard head box sizes are 180mm x 180mm larger head boxes may be required where the curtain drop is in excess of 3m. A suitably weighted bottom bar is provided to prevent deflection and ensure correct operation under gravity.
The roller is constructed from tube, each of which incorporates a 24volt D.C motor. The Insulated Zone Fire Curtain Fabric is a stainless steel wire reinforced glass fabric, coated with a specially formulated intumescent filled silicone. When exposed to temperatures above 160ºC the coating system will form an expanding carbonic char to provide a thermally insulating barrier. The weight is approx. 1750 g/m2 in its finished form. The Fabric thickness is 1.50mm and the weave is 8 shaft satin.
Side guide with a fabric retaining system shall be installed either side to provide a seal between the curtain fabric and the surroundings.
The FireSafe Plus curtain has fixing options to suit all types of ceiling configurations and can be integrated into either a suspended or a solid ceiling. It remains hidden until required. Upon receiving a signal from the fire detection system or on loss of power with the gravity fail safe system, the curtain automatically unwinds to its operational position
The panel model number is FC– 01 GFS and is classified within the following EU Directives: Low Voltage Directive 2006/95/EC and Electromagnetic Compatibility Directive 2004/108/EC.
Under normal operating conditions the curtains would be held in the retracted position via the motors operating at low voltage. Upon activation of the fire alarm the control panel will remove the supply voltage and the curtain will descend under the power of gravity in a controlled manner. A dynamic braking system housed in the motor control circuit controls the speed of descent of the curtain, this is electronically synchronised on overlapping curtains with a common bottom bar.
To retract the curtain the control panel supplies 24v to the motor and the motors drive the curtains to the upper position. As the bottom bar hits the curtain head box the limits setting holds the bottom bar in the retracted position.
Should the mains power fail to the group control panel the supply is automatically switched to the integral standby battery. The curtain remains in the retracted position for 24hrs. The curtain will remain fully operational until the battery low voltage cut off facility reads a voltage of 21v, the curtains will then safely descend under the power of gravity to the operational position.
Complete product tested to (BS) EN1634- 1 and achieved a rating of DH (1000°C, above 240 minutes).
When tested to EN1634- 1 the FireSafe 240 product achieved Integrity performance of 264minutes and irradiance (W) of 30 minutes.
Classifications as detailed within EN 13501 – 2:2007 + A1: 2009 therefore detailed as
Designed to operate for 2000 cycles at normal ambient temperatures in the range of 0°C to 60°C and to withstand hot air and smoke at temperatures up to 1000°C for over 240 minutes once only.
The Firesafe 240 can be provided to protect openings widths of upto 30m on an over lapping system and heights unto 6m.
The FireSafe 60 is an electrically operated automatic Fire Barrier, to be used to form a continuous ...
The FireSafe 240 is an electrically operated automatic Fire Barrier, to be used to form a continuous...