UK's Leading Provider Of Passive Fire Protection Products

Call 0333 043 0018
for Sales or Technical Enquiries

or you can email our sales support team on

Free Technical Support For Passive Fire Products

Free Technical Support

Fast free technical advice for products and projects.

Product Overview: Protecta FR Board

Published: 24/09/2018

The Protecta FR Board consists of a high-density rock wool board which is coated with fire retardant paint on one or two sides, depending on where the fire sealing is to be carried out.

The rock wool is to keep the temperature increase down, whereas the fire retardant paint is designed to prevent fire and hot gases from leaking through the mineral wool board. Currently, this is the most common fire sealing method as it is a quick way of sealing big and/or complicated fire seals when the fitter has some experience with the system. Measurements have shown that you often only spend half the time compared to the traditional mortar system and that it may even be used in wet areas as well as outdoors.

The fire board has been tested on all types of through-penetrations in all types of constructions and may also be combined with Protecta Cable Transit, Collar and Pipe Wrap. It is also ideal for closing over all types of ceilings against concrete floors and has been approved for upgrading of all types of floors.

 Classified for all types of constructions with or without building service penetrations

 Simple and very quick to install

 Easy to retrofit additional building services after installation

 Permanently flexible - will accommodate movements during fire and smaller movements in the construction it has been fitted within

 Suitable for most surfaces, including concrete, bricks, masonry, steel, wood, gypsum, glass, plastic and most non-porous surfaces

 May be used in unlimited lengths in walls with heights up to 1200mm and in floors with widths up to 120 mm.

 May be installed in gypsum walls with or without framing around the opening

 Halogen free with added fungicides

 Once fully cured, the board resists UV, humidity and frost

 Protecta® FR Board can be supplied with a smooth surface

 Precautions are required to be taken to prevent a person stepping onto a blank horizontal penetration seal 

Protecta® FR Board has been tested at BM Trada (UKAS accredited); according to EN ISO 10140-2:2010. 

https://passivefireproducts.com/products/view/231-protecta-fr-board

Product Overview: Protecta FR Board
FAQs | Privacy Policy | Returns Policy | Terms & Conditions
© 2020 Passive Fire Products LTD. All Rights Reserved.
Card Payments Powered By Stripe
Sea Dragon Web Design