Steel Intumescent
Passive Fire Products extensive range of fire retardant coatings.
Intumescent paints for steel, structural steel and cast iron at Passive Fire Products are available with 30, 60, 90 and 120-minute fire protection, to accompany fire retardant paints for other surfaces.
The intumescent paints for steel are available for interior and exterior use and come in a full range of colours, with full product descriptions available on each item. Most of our fire-resistant paints are easy to apply by brush, roller or spray.
Meeting the specification required by building regulations - how much protection can be obtained with listed coatings, what the differences are between fire protection required from your specification.
Fire test standards when using intumescent coatings on structural steel constructions are European Union: EN 13381-8 (Replaces national Standards in Europe) and United Kingdom: BS 476-20/21 (Commonly referred to in EU, Middle and Far East).
Leading manufacturers and intumescent product ranges, include Aithon, Nullifire, Thermoguard.
For clarification on minimum requirements before buying one of our fire-stopping products, please review the information. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.
If there is a product you cannot find, please contact our Technical and Sales Support Team on 0333 043 0018
EP/FS/TCW is supplied ready for use and does not need thinning. Apply 1 coat at 10 – 12m2 per litr...
£19.82+VAT
A red water-based primer for use on internal/external steelwork....
£13.03+VAT
The coating upgrades the insulation and integrity of the installation. The coating is non-toxic, emi...
£42.33+VAT
Nullifire primers are designed to protect the surface of structural steel from corrosive attack.Null...
£61.37+VAT
SC601 is optimised to provide 60 minutes fire resistance to ‘I’ section beams and columns, hollo...
£464.10+VAT
FC101 can reinstate the fire rating to Nullifire coatings where minor damage has occurred.The filler...
£44.73+VAT
SC804 is optimised to provide 90 minutes fire resistance to ‘I’ section beams, columns, hollow c...
£324.05+VAT
TS134 provides a top seal to protect the intumescent coating while also providing an outstanding aes...
£72.38+VAT
FIRETEX FX1003 is designed for site application by airless spray, to provide fire resistance for up ...
£318.38+VAT
Waterborne intumescent coating designed for internal structural steelwork.Provides up to 90 minutes ...
£177.78+VAT
Jotun Steelmaster is a one component waterborne acrylic thin film intumescent coating. Independently...
RRP £195.63
£192.72+VAT
Nullifire SC801-120 Intumescent Basecoat is a waterborne, white, thin film intumescent coating for t...
£326.70+VAT
Nullifire SC802 On-Site Water-Based Intumescent Basecoat is a water- based, white, thin film intumes...
£105.98+VAT
Nullifire PM020 High Build Alkyd Primer is a fast drying steel primer that provides corrosion protec...
£70.18+VAT
Nullifire S606 Solvent-Based Intumescent Coating is a single pack solvent-based intumescent coating ...
£247.20+VAT
TS815 Solvent-Based Acrylic Top Seal is an eggshell decorative top seal. It is primarily for use wit...
£104.95+VAT
Nullifire S708 Durable Water-Based Intumescent Basecoat is a white thin film intumescent coating for...
£187.12+VAT
INTUMESCENT STEEL PAINT FOR STRUCTURAL STEEL AND CAST IRONWater based intumescent coating for the pr...
£17.64+VAT
Nullifire TS816 Water-Based Acrylic Top Seal is a waterborne, acrylic eggshell decorative top seal. ...
£91.65+VAT
