Adhesives and Sealants

Pyrocoustic® Sealant is extensively tested for global requirements, it is supplied in 5kg, 10kg and...

Pyropro® LST has been designed to be used in tunnel systems and is approved for use on the London U...

Pyropro HPE® Sealant is a water based, acrylic sealant utilising a reactive formula that has intume...

Pyrolastic® Fire Resistant Silicone is used to seal linear joints in floor and wall constructions t...

Protecta FR Acrylic is the top selling fire rated mastic in our selection of products. The reason is...

Protecta EX Mortar is a dry white powder which consists of inorganic components and perlite. When wa...

Protecta FR Foam is a fire classified construction foam that has particularly good acoustic properti...

Protecta FR Graphite is a water based fire classified sealing compound that contains a high concentr...

FR IPT is a high performance fire rated sealant, professional quality, one part ready to use sealant...

Protecta® FR ASF is designed to prevent the spread of fire, smoke and gases through openings in fir...

QF2 Fire Protection Compound is intended for use as a gap filling material where cables, ducts or pi...

Stopseal® Ablative Spray Coating is to be used alongside the Stopseal® fire Batt system, to reinst...

Firefly High Temperature Adhesive is a single component, inorganic adhesive for bonding metals and o...

Ablative Spray Coating is to be used alongside the Quelstop® fire Batt system, to reinstate the fir...

Silverseal® HS Compound is a high strength gypsum based compound, used to reinstate the fire resist...

PS Coating is an easy to apply highly viscous, or thick coating suitable to be applied by brush. PS ...

The Flexi-Coat Sealant is supplied in liquid form contained within 10kg and 20kg pails. The Flexi-Co...

FO142 is suitable for bonding FJ203 Fire Rated Woven Rope in concrete joints, rock fibre boards, or ...

FS709 is designed to close off gaps and penetrations in compartment walls and floors, to provide up ...

FS719 is used to reinstate the compartment fire performance of compartment lines (walls & floors) wh...

FS702 is suitable for a variety of applications:Static & movement linear joints (masonry/flexible wa...

FS703 is suitable to fire seal joints in compartment walls and floors:Static linear joints (masonry ...

FR230 is used to stop the spread of fire and smoke around services that pass through compartment wal...

A water resistant and fire retardant intumescent adhesive. Designed with intumescent, thus providing...

A ready-mixed intumescent cement. On curing, the filler sets hard like normal cement but does not cr...

It provides a fire-resistant and smoke-proof seal to adjacent rooms. Multisealant A expands when ex...

In the event of fire, the two-component foam prevents fire and smoke from spreading through fire-res...

This product was used in a number of fire resistance tests employing the general procedures and crit...

Envirograf range of halon-free, intumescent acrylic and acoustic mastics are available in standard c...

Up to 4 hour fire rating (EI240)Suitable for use in flexible walls, rigid walls and floorsSuitable f...

QHPE QuelStop HPE Intumescent Graphite Sealant is a high expansion intumescent acrylic based graphit...

Firetherm IntumasticSuitable for dry internal use only.Joint widths 0 to 35 mm linear; 30 to 150 mm ...

Guidelines advise that the spread of fire inside a building can be minimized when provisions  are m...

...

Pyrocoustic® Sealant is a water based acrylic sealant used to reinstate the fire resistance of wall...