Fire Stopping Products
Available in 50mm, 65mm or 75mm length...
It is designed to prevent the passage of fire between compartment floors and walls, whilst still all...
PipeBloc EL is formulated with thermoplastic composites based on reactive intumescent technology, it...
Non-combustibleHigh densityEasy to cut and install...
Ablative Spray Coating is to be used alongside the Quelstop® fire Batt system, to reinstate the fir...
Features & Benefits Suitable for plasterboard partitions and concrete floors and wallsSuitable for ...
Features & BenefitsLightweight and easy to handleProvides various fire ratingsSuitable for various g...
Available in 40mm or 75mm Length...
A white intumescent coating for application to rock fibre slabs and non-fibrous slabs. Upgrades thei...
QWW CE Marked Intuwraps prevent the spread of fire through PVC, HDPE & PP pipes where they penetrate...
QWR CE Marked Intumescent Fire Collars prevent the spread of fire where PVC, HDPE & PP pipes penetra...
QuelCoil CE Marked Continuous Intuwrap is a universal intumescent pipe wrap used to maintain the fir...
MW Mineral Wool Shuttering Slab provides a simple means of shuttering to Quelfire Fire Protection Co...
Protecta Service Transit has been designed to maintain the fire resistance of walls and floors when ...
Protecta Pipe Wrap consists of a plastic wrapped graphite based swelling material that reacts with h...
FJ400 is used to reinstate the performance of fire compartment lines, both walls and floors, where c...
Offering contractors a simple and cost effective fire protection solution, the mineral wool insulati...
Ideal where decorative ceilings cannot be disturbed or accessed due to lower floor occupancy. FB770 ...
Non-combustible with a melting point in excess of 1000°CFire-teK Beam and Column Slabs are manufact...
Fire-teK BD 917 is a rigid Rock Mineral Wool slab reinforced with an aluminium foil facing to one si...
Rainscreen cladding systems are designed to allow free air flow and the drainage of moisture, whilst...
Protecta FR Fire Collar consists of a split white coated, circular steel casing designed to fit arou...
This product is suitable for either retrofit or for inclusion prior to service installation.FP220 is...
FP170 has been tested with combustible pipes (PVC, PE, PP, SanPVC, Bevex, etc.), insulated non-combu...
FP302 is also a component product incorporated within many Nullifire fire stopping products.This pro...
FI025 is designed to upgrade the insulation rating of uninsulated penetrated services (where require...
FI140 is to be used as a shutter/dam for our Nullifire FR230 Intucompound Fire Mortar, for use in fi...
FI064 has been specifically tested for a high movement backer, when used in conjunction with other N...
FJ240 is a dense rock mineral fibre board Class A1 core with a BC0 aluminium foil applied to two fac...
FJ220 is a strong, fast-fit flexible fire seal for curtain wall, slab edge and vertical cladding app...
FB750 is designed to reinstate the fire performance of compartment walls and floors which have been ...
Material Specification:Multigraf Intumescent material chemical constitutionMineral Wool Fibre 20-70%...
The installation of ROCKWOOL’s Firestop Compound provides up to 6 hours fire protection to provide...
Envirograf intumescent collars for fire stopping plastic pipes through all your ceiling, walls and...
When installing pipework through fire rated walls and floors, core holes are often larger than the s...
ROCKWOOL Insulated Fire Sleeves possess a unique combination of stone wool and graphite intumescent ...
The ROCKWOOL 50mm Ablative Coated Batt is a mineral wool insulation product, pre- coated on both sid...
Stopseal® LGS is an intumescent thermoplastic filled with flame retardants and binders which provid...
Envirograf high-density rock-fibre batt with intumescent coating on both sides that can be easily cu...
Stopseal® Batt is a coated stone wool board used to reinstate the fire resistance performance of fl...
Protecta FR Acrylic is the top selling fire rated mastic in our selection of products. The reason is...
The rock wool is to keep the temperature increase down, whereas the fire retardant paint is designed...
Stopseal® Ablative Spray Coating is to be used alongside the Stopseal® fire Batt system, to reinst...
PipeBloc® PWP Wraps are designed and tested to seal service penetration apertures containing plasti...
PipeBloc® PCP Collars are designed and tested to seal service penetration apertures containing plas...
Silverseal® Compound is a fire-resistant Gypsum based mortar material used to reinstate the fire re...
NS Putty® is designed to remain flexible allowing for thermal and mechanical movement of services a...
S-Line® Fire Pillows are an ideal product to create a temporary or permanent fire barrier around ma...
A strip of intumescent material clad in foil designed as wraps. Can be cut to size and wrapped aroun...
Passive Fire Products Fire Stop Labels allows for easy Identification of fire-rated systems and prov...
QB50 QuelStop Ablative Coated Mineral Wool Fire Batt is a coated mineral wool board used to reinstat...
Protecta FR Collar consists of a split red coated, circular steel casing designed to fit around plas...
Fire Stopping Products
Passive Fire Products range of Fire Stopping Products. We offer a large range of fire stopping products. From fire batts and fire collars, fire wraps, fire mortar.
If there is a product you cannot find, please contact our Technical and Sales Support Team on 0333 043 0018