Steel Intumescent Paint
Steelmaster 120SB is a single pack, high solids, solvent based acrylic thin film intumescent coating...
£293.33 Ex VAT
£352.00 Inc VAT
EP/FS/TCW is supplied ready for use and does not need thinning. Apply 1 coat at 10 – 12m2 per litr...
RRP £19.82
£19.82 Ex VAT
£23.78 Inc VAT
A red water-based primer for use on internal/external steelwork....
RRP £13.03
£13.03 Ex VAT
£15.64 Inc VAT
The coating upgrades the insulation and integrity of the installation. The coating is non-toxic, emi...
RRP £43.55
£43.55 Ex VAT
£52.26 Inc VAT
Nullifire primers are designed to protect the surface of structural steel from corrosive attack.Null...
RRP £127.62
£127.62 Ex VAT
£153.14 Inc VAT
SC601 is optimised to provide 60 minutes fire resistance to ‘I’ section beams and columns, hollo...
RRP £497.13
£497.13 Ex VAT
£596.56 Inc VAT
SC804 is optimised to provide 90 minutes fire resistance to ‘I’ section beams, columns, hollow c...
RRP £347.13
£347.13 Ex VAT
£416.56 Inc VAT
Carbothane 134HP White 5L Kit provides a top seal to protect the intumescent coating while also prov...
RRP £118.08
£118.08 Ex VAT
£141.70 Inc VAT
Can be used to protect steel requiring only 2 hrs fire protection, reducing product requirements c...
£234.03 Ex VAT
£280.84 Inc VAT
Jotun Steelmaster 60SB is a one component solvent based acrylic thin film intumescent coating indepe...
£293.33 Ex VAT
£352.00 Inc VAT
Jotun Thinner No. 7 is a paint thinner designed to improve the flow of a range of Jotun acrylic, vin...
RRP £33.33
£33.33 Ex VAT
£40.00 Inc VAT
Conseal TU has very good colour retention and corrosion resistance for metals, equipment, cladding, ...
£54.17 Ex VAT
£65.00 Inc VAT
Pilot QD Primer is a fast air drying zinc phosphate anticorrosion primer with a matt finish, providi...
£158.33 Ex VAT
£190.00 Inc VAT
FIRETEX FX1003 is designed for site application by airless spray, to provide fire resistance for up ...
RRP £381.12
£381.12 Ex VAT
£457.34 Inc VAT
Waterborne intumescent coating designed for internal structural steelwork.Provides up to 90 minutes ...
RRP £238.08
£238.08 Ex VAT
£285.70 Inc VAT
Steelmaster 600WF is a single pack, high solids, waterbourne thin film intumescent coating independe...
£96.58 Ex VAT
£115.90 Inc VAT
Nullifire SC801-120 Intumescent Basecoat is a waterborne, white, thin film intumescent coating for t...
RRP £349.95
£349.95 Ex VAT
£419.94 Inc VAT
Nullifire SC802 On-Site Water-Based Intumescent Basecoat is a water- based, white, thin film intumes...
RRP £113.53
£113.53 Ex VAT
£136.24 Inc VAT
Carbocoat 115 SP Red Primer is a fast drying steel primer that provides corrosion protection on stru...
RRP £75.18
£75.18 Ex VAT
£90.22 Inc VAT
TS815 Solvent-Based Acrylic Top Seal is a white decorative top seal. It is primarily for use with Nu...
RRP £121.42
£121.42 Ex VAT
£145.70 Inc VAT
INTUMESCENT STEEL PAINT FOR STRUCTURAL STEEL AND CAST IRONWater based intumescent coating for the pr...
RRP £21.44
£21.44 Ex VAT
£25.73 Inc VAT
Nullifire TS816 Water-Based Acrylic Top Seal is a waterborne, acrylic decorative top seal. It is pri...
RRP £99.87
£99.87 Ex VAT
£119.84 Inc VAT
Steel Intumescent Paint
Passive Fire Products extensive range of fire retardant coatings.
Intumescent paints for steel, structural steel and cast iron at Passive Fire Products are available with 30, 60, 90 and 120-minute fire protection, to accompany fire retardant paints for other surfaces.
The intumescent paints for steel are available for interior and exterior use and come in a full range of colours, with full product descriptions available on each item. Most of our fire-resistant paints are easy to apply by brush, roller or spray.
Meeting the specification required by building regulations - how much protection can be obtained with listed coatings, what the differences are between fire protection required from your specification.
Fire test standards when using intumescent coatings on structural steel constructions are European Union: EN 13381-8 (Replaces national Standards in Europe) and United Kingdom: BS 476-20/21 (Commonly referred to in EU, Middle and Far East).
Leading manufacturers and intumescent product ranges, include Aithon, Nullifire, Thermoguard.
For clarification on minimum requirements before buying one of our fire-stopping products, please review the information. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.
If there is a product you cannot find, please contact our Technical and Sales Support Team on 0333 043 0018
